Manufacturers Supply Disposable Sterile Non-woven Isolation Gown Doctors And Nurses Medical Sterilization Surgical Gown Isolation Clothing
Manufacturers Supply Disposable Sterile Non-woven Isolation Gown Doctors And Nurses Medical Sterilization Surgical Gown Isolation Clothing
Manufacturers Supply Disposable Sterile Non-woven Isolation Gown for doctors and nurses. Medical sterilization surgical gown, isolation clothing at our factory.
Isolation/surgical gown consists of cap top and pants, made of nonwoven, laminated nonwoven or spunbond meltblown spunbond nonwoven (SMS) as the main raw material, cut and sewn. Non-sterile provision, single-use.
Application
It is suitable for procedures in which the patient's blood is known to be free of infectious viruses, to prevent the transmission of infectious agents between the patient and healthcare personnel during surgical procedures and other invasive examinations. Prevent the transmission of infectious agents between patients and healthcare workers during surgical procedures and other invasive examinations. [Product name] Isolation gown Material The material is non-woven. Perfomance
Performance Name
Unit
Request
Product key areas
Non-critical areas of the product
Anti-microbial penetration, dry
logucfu
not required
≤2
Anti-microbial penetration, wet
I
≥2.8
not required
Cleanliness, microbiological
log. (cfu/dm²)
≤2
≤2
Cleanliness, particulate matter
IPM
≤3.5
≤3.5
cotton wadding
1og。(flocculation count)
≤4.0
≤4.0
impermeability
cmH,0
≥20
≥10
Bursting strength, dry
kPa
≥40
≥40
Bursting strength, wet
kPa
≥40
not required
Tensile strength, dry
N
≥20
≥20
Tensile strength, wet
N
≥20
not required
Lacing 1 Tie length 1.1 The length of the neckband should not be less than 30cm. 1.2 The length of the waist tie should not be less than 56cm. 2 Lacing firmness: 5N force is applied to the fixed place of lacing, and the lacing does not break or fall off. 3. Performance of sewing parts 4. Appearance of sewing part The appearance of the sewing part should be neat, no false edges. 5. Sewing density Sewing density should be not less than 20 stitches/10cm. Used in medical institutions outpatient, ward, laboratory, etc. for general isolation. [Use method] 1. Check whether the package and isolation coat are damaged before use, if there is damage, it is prohibited to use; 2. Open the package, you can use. 3. Wear isolation clothes method: 3.1 Put on the mask first, roll the sleeves over the elbow, open the isolation suit and pull the zipper to the right position. 3.2 Hold the left and right cuffs with your left and right hands while holding the zipper opening at the waist of the isolation garment. 3.3 Put on the lower limbs first, then the upper limbs, then pull the zipper to the chest, then snap the isolation cap on the head, pull the zipper all After pulling the zipper all the way up, seal the zipper opening and check the seal of the combined parts of the mouthpiece and isolation clothing. 4. Isolation clothing removal method 4.1 Disinfect your hands. 4.2 Grab the outside of the isolation coat collar, unzip the isolation coat and take off the cap, open the zipper from top to bottom, and turn it outward while taking it off. Turn outward. 4.3 Take off to the feet in order to withdraw the feet from the isolation suit and put them into the contamination bag. [Product performance indicators]
Advantages
1、Good quality, choose high quality non-woven fabric (SMS) as the main raw material. 2、Reasonable price, the unit price of each isolation coat is between 1.33 USD and 1.35 USD. 3、 Direct sales from manufacturers, one-stop service, no need to worry about delivery time.
Company Introduction
Chongqing Hongguan Medical Equipment Co. Ltd. is a professional medical supplies manufacturer, which has complete and scientific quality management systems .The Comapny has the best products and professional sales and technical team, we provide our customers the best products, good technical support, and perfect after-sales service .Chongqing Hongguan Medical Equipment Co., Ltd. has been recognized by the industry for its integrity, strength and product quality.
FAQ
1. Are you trading company or manufacturer ? A:Manufacturer 2. What is your delivery time? A:1-7days within Stock; Depends on the quantity without Stock 3.Do you provide samples ? is it free or extra ? A: Yes, Samples will be free, You only need to afford the shipping cost. 4. why should you buy from us not from other suppliers? A. High Quality Products + Reasonable Price + Good Service 5. What is your terms of payment ? A:Payment<=50000USD, 100% in advance. Payment>=50000USD, 50% T/T in advance ,balance before shippment.Hongguan care about your health. See more Hongguan Product→https://www.hgcmedical.com/products/ If there are any needs of medical comsumables, please feel free to contact us. [email protected]